Skip to main content

low alloy chrome moly alloys - Weldcote Metals

-->

80S-B2 Low Alloy / High Strength Steel Wires


Logo

Weldcote   |   704.739.4115   |   ​info@weldcotemetals.com   |   www.weldcote.com





80S-B2 Low Alloy / High Strength Steel Wires

low-alloy-chrome-moly-alloys

Weldcote Metals ER80S-B2 is used to weld 1/2Cr-1/2Mo, 1Cr-1/2Mo, and 1-1/4Cr-1/2Mo steels for elevated temperatures and corrosive service.

  • It is also used for joining dissimilar combinations of Cr-Mo and carbon steels.
  • All Transfer modes of the GMAW process may be used
  • Careful control of preheat, interpass temperatures, and postheat is essential to avoid cracking.
  • ER80S-B2 is classified after postweld heat treatment
  • Special care must be used with using it in the as-welded condition due to higher strength levels.

Download ImageDownload Image Download SDSDownload SDS

#: 109 Catalog Page: 21
order Part Number Product Description Size U/M UPC Number Standard Carton SDS

ER80S-B2 Chrome Alloy

order 80SB2116X36T ER80SB-2 1/16 x 36 1/16 LB CARBON STEEL TIG CARBON STEEL TIG Chrome Alloy 877511004823 4-10 lb tubes in 40 lb ctn SDS Spec Cert
order 80SB2332X36T ER80SB-2 3/32 x 36 3/32 LB CARBON STEEL TIG CARBON STEEL TIG Chrome Alloy 877511001792 4-10 lb tubes in 40 lb ctn SDS Spec Cert
order 80SB218X36T ER80SB-2 1/8 x 36 1/8 LB CARBON STEEL TIG CARBON STEEL TIG Chrome Alloy 877511001808 4-10 lb tubes in 40 lb ctn SDS Spec Cert



Product Gallery


top